Company News

Current location:Home > News Center > Company News

Covered Verandas for Light Steel Villas | ESS Prefab Home

A covered veranda gives a light steel villa an outdoor living area directly off the house. The layout works best when the veranda roof, support posts and door threshold are drawn with the villa from the start. The builder can then see where the roof drains, which supports the site team must provide and how the outdoor floor meets the interior.

Start with how the veranda will be used

Mark the furniture and walking route on the plan before choosing the veranda depth. A dining table needs room for chairs to pull out and a clear route to the sliding door. A smaller sitting area may fit beneath a shallower cover. On exposed sites, show the direction of afternoon sun and wind-driven rain so the designer can consider where additional shade or screening belongs.

Coordinate roof drainage with the door

Decide whether the veranda shares the main roof or has its own lower roof. Ask for a section through the wall, roof and exterior door showing the flashing, gutter discharge and finished deck level. The installer needs enough information to keep runoff away from the doorway and continue the wall’s drainage layer around the junction. Confirm the post locations against the views and routes shown on the floor plan.

Send ESS Prefab Home your floor plan, preferred veranda use and site orientation. We can review which veranda components belong in the villa kit and which are supplied by the local builder.

Back to top